Xiaomi Redmi 3/3s Prime Flash File (Stock ROM) Download

Download Xiaomi Redmi 3s Prime Miui9 Flash File:

land_global_images_V10.2.2.0.MALMIXM_20190423.0000.00_6.0_global

land_global_images_V10.2.1.0.MALMIXM_20190114.0000.00_6.0_global

land_global_images_V9.5.8.0.MALMIFD_20180614.0000.00_6.0_global

land_global_images_V9.5.5.0.MALMIFA_20180419.0000.00_6.0_global

Xiaomi Flash tool

Flashing a phone like the Redmi 3S Prime is a technical process that involves installing new firmware (ROM) on the device. This can be done for various reasons, such as updating to a newer version of MIUI, installing a custom ROM, or unbricking a device that is stuck or not booting.

Warning: Flashing your phone can be risky. You may void your warranty and there is a possibility of bricking your device if the process is not followed correctly. Always back up all your important data before you start, as flashing will erase everything on your phone.

Here are the general steps involved, but keep in mind that specific tools and procedures can vary. It’s crucial to follow a detailed, step-by-step guide from a reputable source for your specific device model.

Prerequisites:

1. A Windows PC: Flashing tools often work best on a Windows computer.
2. USB Cable: Use a high-quality USB cable to connect your phone to the PC.
3. Drivers: You need to have the correct drivers installed on your PC so it can recognize your Redmi 3S Prime. This usually includes ADB, Fastboot, and Qualcomm drivers.
4. Flashing Tool: The most common tool for flashing Xiaomi phones is the Mi Flash Tool. Download it from the official MIUI website or a trusted source.
5. ROM File: You’ll need to download the specific ROM (firmware) you want to flash. This is typically a Fastboot ROM, which comes in a .tgz format. Make sure you download the correct ROM for your exact model of Redmi 3S Prime (e.g., Global, China) and chipset.
6. Sufficient Battery: Ensure your phone has at least 50% battery charge to prevent it from dying during the process.

General Steps:

1. Unlock Bootloader (if required): For many flashing methods, especially for custom ROMs or downgrading, you need to have an unlocked bootloader. Unlocking the bootloader is an official process from Xiaomi that requires a specific tool and permission.
2. Install Drivers and Flashing Tool: Install the necessary drivers on your PC. Then, install the Mi Flash Tool.
3. Download and Extract the ROM: Download the Fastboot ROM file. It will be compressed, so you need to extract it to a folder on your PC. The extracted folder will contain various files and subfolders.
4. Boot into Fastboot Mode: Turn off your Redmi 3S Prime. Then, press and hold the Volume Down button and the Power button simultaneously until you see the Mi Bunny logo on the screen. This indicates you’re in Fastboot mode.
5. Connect to PC: Connect your phone to your PC using the USB cable.
6. Open Mi Flash Tool: Run the Mi Flash Tool as an administrator on your PC.
7. Select the ROM: In the Mi Flash Tool, click the “Select” button and navigate to the folder where you extracted the Fastboot ROM. Make sure you select the top-level folder of the ROM.
8. Refresh and Detect Device: Click the “Refresh” button in the Mi Flash Tool. Your device should appear in the list. If it doesn’t, check your drivers and USB connection.
9. Choose Flash Method: At the bottom of the Mi Flash Tool, you will see options like “clean all,” “save user data,” or “clean all and lock.”
   • clean all: This erases all data and flashes the ROM. Your phone will be completely wiped. This is the recommended option for a clean flash.
   • clean all and lock: This erases all data and flashes the ROM, and then relocks the bootloader. This is often used when returning to a stock ROM.
   • save user data: This attempts to flash the ROM while keeping your user data, but it’s less reliable and not recommended for major updates or troubleshooting.
10. Start Flashing: Click the “Flash” button to start the process.
11. Wait for Completion: The flashing process will take some time. Do not disconnect the phone or perform any actions on the PC until the process is complete and you see a “Success” message in the Mi Flash Tool.
12. Reboot: Once the flash is successful, your phone should automatically reboot. The first boot after flashing may take longer than usual.

Important Notes:

1. For some specific situations, such as unbricking a phone with a locked bootloader, you might need to use the EDL (Emergency Download) mode. This is a more advanced method and often requires special cables or test points.
2. Always refer to a guide from a reliable source like the official MIUI forums or XDA Developers for the most accurate and up-to-date instructions for your specific phone model and ROM.
3. The steps provided above are a general overview. It’s crucial to follow a detailed, visual guide or a video tutorial to ensure you don’t miss any critical steps.