The latest firmware for the Xiaomi Redmi 7A is now available, officially provided by Xiaomi. This stock ROM comes in MBN format, suitable for flashing your device in Fastboot mode or EDL mode.
pine_in_global_images_V12.5.1.0.QCMINXM_20211227.0000.00_10.0_in
pine_global_images_V12.0.1.0.QCMMIXM_20210121.0000.00_10.0_global
pine_in_global_images_V12.0.1.0.QCMINXM_20201230.0000.00_10.0_in
pine_global_images_V11.0.5.0.QCMMIXM_20201128.0000.00_10.0_global
pine_in_global_images_V11.0.3.0.QCMINXM_20201016.0000.00_10.0_in
)
🚀 Flashing Process (Fastboot Mode)
- Download & Extract Firmware Get the official Fastboot ROM for Redmi 7A and extract it to a known location on your PC.
- Install Mi Flash Tool If not already installed, set up the Mi Flash Tool on your computer.
- Boot Device into Fastboot Mode
- Power off your Redmi 7A.
- Press and hold Volume Down + Power until the Fastboot screen appears.
- Connect to PC Use a USB cable to connect your phone to the computer.
- Launch Mi Flash Tool
- Click Refresh to detect your device.
- Click Select and choose the folder where you extracted the firmware.
- Choose Flashing Option
- Options include:
- Clean all (recommended)
- Save user data
- Clean all and lock (locks bootloader)
- Options include:
- Start Flashing Click Flash and wait for the process to complete. You’ll see a success message when it’s done.
- Reboot & Setup Disconnect your phone and power it on. It should boot into the newly flashed system.
⚠️ Important Notes
- Backup your data: Flashing will erase everything.
- Battery: Ensure your phone has at least 60% charge.
- Bootloader: Must be unlocked for Fastboot flashing.
If you’re flashing in EDL mode, the process involves test points and Qualcomm HS-USB QDLoader drivers. Let me know if you want that method too.