Redmi 10C Fog Flash File (Stock ROM) Download

Download the stock ROM and flash file for the Xiaomi Redmi 10C. The Redmi 10C’s official, most recent MIUI 14 firmware file. The MBN file, which explains how to flash and install the driver using the Mi Flash tool, contains this flash file. The detailed instructions for flashing a Xiaomi phone with a flash file are provided below. How to Flash Manual.

fog_global_images_V14.0.9.0.TGEMIXM_20250206.0000.00_13.0_global_RMM

fog_global_images_V14.0.8.0.TGEMIXM_20240828.0000.00_13.0_global_RMM

fog_in_global_images_V14.0.7.0.TGEINXM_20240829.0000.00_13.0_in_RMM

fog_global_images_V14.0.7.0.TGEMIXM_20240527.0000.00_13.0_global

fog_in_global_images_V14.0.6.0.TGEINXM_20240513.0000.00_13.0_in

fog_global_images_V14.0.6.0.TGEMIXM_20240319.0000.00_13.0_global

fog_in_global_images_V14.0.5.0.TGEINXM_20240129.0000.00_13.0_in

fog_global_images_V14.0.5.0.TGEMIXM_20231225.0000.00_13.0_global

fog_in_global_images_V14.0.4.0.TGEINXM_20231126.0000.00_13.0_in

fog_global_images_V14.0.4.0.TGEMIXM_20231007.0000.00_13.0_global

fog_in_global_images_V14.0.3.0.TGEINXM_20230920.0000.00_13.0_in

fog_in_global_images_V14.0.2.0.TGEINXM_20230728.0000.00_13.0_in

🛠️ Flashing Instructions (Fastboot Method)

1. Download Required Files
   • Firmware .tgz file (e.g. fog_global_images_V14.0.9.0.TGEMIXM_20250206.0000.00_13.0_global)
   • Mi Flash Tool
   • Xiaomi USB Drivers
2. Boot into Fastboot Mode
   • Power off the phone.
   • Hold Volume Down + Power until Fastboot logo appears.
3. Install Drivers
   • Ensure Qualcomm HS-USB QDLoader 9008 appears in Device Manager.
4. Extract Firmware
   • Use 7-Zip to extract .tgz → .tar → firmware folder.
5. Launch Mi Flash Tool
   • Click Select and choose the extracted firmware folder.
   • Click Refresh to detect your device.
6. Flash the ROM
   • Choose Clean All (recommended).
   • Click Flash and wait for success message.
7. Reboot Automatically
   • Device will restart with the new firmware.

⚠️ EDL Mode (If Fastboot Doesn’t Work)

Some guides suggest using Test Point method:

• Disconnect battery.
• Short EDL points on motherboard.
• Reconnect battery and USB.
• Flash via Mi Flash Tool in EDL mode.

✅ Tips for Success

• Match firmware region (IN for India, MIXM for Global).
• Avoid “Save User Data” unless you’re sure.
• Always verify MD5 checksum before flashing.