Redmi 10/Prime Flash File (Stock ROM) Download

Download the stock ROM and flash file for the Redmi 10. The Xiaomi Redmi 10’s official latest version MIUI 12 firmware file. The MBN file, which explains how to flash and install the driver from Xiaomi FlashTool, contains this flash file. The detailed instructions for flashing a Redmi phone with a flash file are provided below. How to Flash Manual.

selene_global_images_V14.0.7.0.TKUMIXM_20240424.0000.00_13.0_global

selene_in_global_images_V14.0.7.0.TKUINXM_20231012.0000.00_13.0_in

selene_global_images_V14.0.6.0.TKUMIXM_20231202.0000.00_13.0_global

selene_global_images_V14.0.4.0.TKUMIXM_20230803.0000.00_13.0_global

selene_in_global_images_V14.0.6.0.TKUINXM_20230726.0000.00_13.0_in (Android-13)

selene_global_images_V13.0.16.0.SKUMIXM_20230601.0000.00_12.0_global

selene_global_images_V13.0.15.0.SKUMIXM_20230320.0000.00_12.0_global

selene_in_global_images_V13.0.7.0.SKUINXM_20230410.0000.00_12.0_in

selene_in_global_images_V13.0.5.0.SKUINXM_20221228.0000.00_12.0_in

🛠️ Flashing Instructions

1. Install Xiaomi USB Drivers
   • Ensure your PC recognizes the device in Fastboot mode.
2. Boot into Fastboot Mode
   • Power off the phone.
   • Press and hold Volume Down + Power until Fastboot screen appears.
3. Launch Xiaomi Flash Tool
   • Load the downloaded .MBN firmware file.
   • Select your device from the list.
4. Connect Device via USB
   • Confirm it’s detected by the tool.
5. Start Flashing
   • Choose “Clean All” (recommended for fresh install).
   • Click Flash and wait for completion.
6. Reboot Automatically
   • Once done, the phone will reboot with the new firmware.

⚠️ Tips & Warnings

• Backup your data before flashing.
• Use the correct regional firmware (IN for India, MIXM for Global).
• Don’t disconnect the device during flashing